Pivot Bearings!!!
Post new topic   Reply to topic    MTBE Forum Index -> Mountain Biking Discussion
View previous topic :: View next topic  
Author Message
jonboy1066



Joined: 07 Jul 2014
Posts: 265
Location: Hastings

PostPosted: Sat Feb 18, 2017 10:24 pm    Post subject: Pivot Bearings!!! Reply with quote

Well that escalated quickly! A quick look at the wheel bearings after I heard strange noises over on my last Surrey Hills ride turned into all the pivot bearings coming out & found to be fecked! And an axel bolt ruined.

I now have ½ a bike for a while until I can get a new bolt and a replacement bearing kit.

The wheel bearings are fine.





I've never removed or fitted bearings before and even with help today from the fitters at work it was a real palaver!

Sooo! I'm a little worried about messing the new ones up when I replace them but the price of a bearing press to fit all 4 different sizes would be more than getting the LBS to do it for me...

I've seen a few homemade presses... but was wondering what your experiences of home made presses were & have you got any pics of yer own?
Back to top
View user's profile Send private message

Register & log in to remove these advertisements!
Nik Gnashers



Joined: 30 Dec 2014
Posts: 265
Location: Lincoln

PostPosted: Sun Feb 19, 2017 8:23 pm    Post subject: Reply with quote

I did mine myself, and ordered both the replacement bearings + bushings kit from FELT (my bike has an equilink / T-bone thingy with bushings in), and also the official FELT tool kit to do the job.
Well, the tool kit was basically the same as what some other members on here have 'bodged' together to do the same job on their bikes.
It's basically a couple of long bolts, with metal cups (which are similar to the sockets on a socket set), and a few spacers / washers etc.

Tool kit on the left in this pic - http://i481.photobucket.com/albums/rr173/DJ_Nik_Gnashers/Bearing%20kit _zpstun1lcai.jpg

The bearings were actually not too bad to do on mine, it was the bushings that were a pain.
this is the T-bone - http://i481.photobucket.com/albums/rr173/DJ_Nik_Gnashers/424E121A-E8CA -4DA0-9242-AC6773ABB4A3_zpsujf0wclo.jpg
If your careful, a flat-blade screwdriver is as good as anything for tapping out the old bearings (from the opposite side. The main pivot in mine was the trickiest - http://i481.photobucket.com/albums/rr173/DJ_Nik_Gnashers/Top%20Pivot%2 0Bearing_zpsrixp3da1.jpg
The bushings you can justs ee inside the hole in the T-bone here, man these were a bitch and no way without the 'tool kit' to do these - http://i481.photobucket.com/albums/rr173/DJ_Nik_Gnashers/436DB74B-26FB -4ABC-86C2-CB498EC0ED4C_zps19txwusw.jpg
I know how you feel though, it's a bit of a task doing them, and especially frustrating when your bike look slike yours or mine does - http://i481.photobucket.com/albums/rr173/DJ_Nik_Gnashers/87FEE45F-4977 -4503-87F1-1B1F7B8DB220_zpsu8svp1px.jpg

_________________
Felt Virtue 50 (2015) with upgrades
Done : Sherwood Pines, Dalby Forest, Cannock Chase, Gisburn Forest, Thetford Forest
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    MTBE Forum Index -> Mountain Biking Discussion All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum